Projects

• Repurposed (2) 30,000 gallon propane storage tanks.
• Dismantled and decommissioned existing bulk plant for project requirements. 
• Managed the project from design to commissioning.
• Provided all NFPA 58 required signage for safety compliance.
  Learn more about our reactor fabrication solutions here.

• Turnkey project completed in McGregor, Texas facility for Gulf Coast petrochemical manufacturer. 
• Cyclopentane Tower specifications: 42" diameter x 852" length, SA516-70N material.
• Designed with a design pressure of 160 PSI and ASME SEC. VII Div. 1 code compliance.
  Learn more about our reactor fabrication solutions here.

• Designed, engineered, and fabricated [8] 5,000 gallon stainless steel finishing and mixing tanks. 
• Fabrication of mixer supports, internal baffling, and sparger rings. 
• Turnkey operations setup by sister company, MIG. 
  
  Learn more about our custom fabrication solutions here.

• Designed as per ASME Sect. VIII Division 2 guidelines.
• Fabricated 621,000 gallon high pressure fuel gas mixing vertical vessel.
• Vessel Dimensions: 192” Diameter x 69’ Seam-to-Seam, 81’4” Height
• Lead time of 4 month and upon completion sent to Louisiana. 
  Learn more about our fabrication services and solutions here.

• Bendel, a subsidiary of TransTech, designed and fabricated a 6,000-Gallon Hastelloy C-276 ASME Reactor. 
• Zone shell and bottom half pipe jacket design for maximum efficiency.
• Bead blast finish for enhanced exterior durability.
• Project caters to organic chemical processing plant requirements.
• Learn more about our reactor fabrication solutions here.

• Fabricated 18,000 Gallon ASME pressure vessel.
• Completed engineering, design, construction, and installation of equipment.
• Provided truck unloading stanchion, dual redundant regulatory, and emergency shutdown system.
• Storage vessel fabrication and landscape architecture. 
  Learn more about our storage tank solutions here.

•  Custom BEM Heat Exchangers designed and fabricated by TransTech's subsidiary, Bendel, in Charlotte, NC. 
• ASME Section VIII Design compliant, using high-quality carbon steel materials. 
• Exterior Finish: SSPC SP-6, Carboline Thermaline 450 painted.
• Shellside design: 425 MAWP/FV at 230F/-20F.

• Dismantled & decommissioned existing vaporizer system.
• Coordinated freight, logistics & project management.
• Construction & installation of equipment.
• Resolved under time-sensitive deadlines.
• Start-up, training & commissioning.

Learn more about our vaporizer solutions and access our vaporizer selection guide!

• Installed Stripped Water Cooler Shell & Tube Heat Exchanger in Texas.
• Scope of work involved fabrication and installation in a Plastic Resin Chemical Processing facility.
• Equipment used: 59-240 AEU Shell & Tube Heat Exchanger.
  Learn more about our heat exchanger solutions here.

• Fabrication and installation of a 3-Phase separator vessel.
• Compliance with latest ASME SEC. VIII, Div. 1 standards.
• Integration into a gas processing facility in Texas.
  
  Learn more about our fabrication services and solutions here.